* The main reason for deciding to install a thermostatic shower is the advantage of controlling the water temperature in a simple and reliable *

The work is simple, requires few materials and you can do yourself. In addition, sanitation specialists recommend this change for its practicality.

To do this you need a wrench or spanner and Teflon roll to use it eventually.

To install a thermostatic shower

1 First, turn off the general flow of water.

2 Open the faucet so much hot water as cold and check that you have closed the taps well.

3 Remove the old faucet with the help of a wrench or spanner. An expert tip: loosen the fittings, alternately tightening the nut on the hot water and cold water. This prevents the nuts and push the new facility will fit more easily.

4 When you have removed the old faucet, remove the old knobs and replace them with new ones. They inserted a screw on the eccentric.

5 Before installing the new faucet, it's good that you apply a few turns of Teflon tape on the external thread of the eccentric (swivel). This is an extra precaution, because the mixer is fitted with a rubber seal that prevents leaks. Teflon reinforced rubber, after the wear and tear, and also loosening of the nuts.

6 Place the nuts together, if they are not already mounted, it all depends on the type of fitting. Calza fittings and tighten the nuts by hand and alternately.

7 At the end, place the hose, making sure you have your rubber seal. You can enjoy a pleasant shower.