Decoration lamp
Lighting plays a key role in the home, in addition to determining the location of the light as well as the type of lighting, you can also decorate lamps in different locations of the house as being in the bedroom, the living, and so on. Even decorate and paint giving them a personal touch can be a fun task. The first thing to do is to design a drawing that I made on the lampshade.
Step 1: To start designing simple drawings is advisable because the practice is acquired through practice. You can choose to make geometric shapes, or simple lines, combining three or four colors. The design you make should result in a later paper, using a pen to the screen pass to edit. Something fundamental has to take into account when you are performing this task is not very strong mark the lines, it can happen that the screen material is thin and brittle and break ends.
Step 2: Having made the picture on the screen, the next step is to color. To do something very important is having the right paintings. In this case what is used for painting are oil-based paint pens. The most desirable color when is it a show of hands to avoid passing his hand over already painted areas and thus generate unwanted smudges.
Step 3: After coloring before the oil dries must get the color screen to enter what you should use a toothbrush that is clean and dry. You must use one for each base color and rub circularly used.
Step 4: After brushing the entire surface must remove the paint has not penetrated the screen using some absorbent paper such as kitchen linen. This should be done by taking small jabs to prevent color mixing and more.
Step 5: Finally you must let the primer dry for 12 hours or more. And once the paint dries you can proceed with the design using the same oil paintings.