Cleaning the pool
With the arrival of good weather'm excited by taking a dip in the pool refreshing. To prepare the pool for the summer requires special care and maintenance so that we can pull the water safely and in the best conditions of hygiene. In the water you can find all kinds of microorganisms, some harmless and other pathogens, and although it seems clear and transparent, it can contain pollutants, viruses and bacteria that can cause illness and infections.
So to be recommended, at least once a year, completely drain the pool to clean up its structure. The discharge can be done in many ways the key to opening the water flow or by the typical pump. The next step is to analyze in depth the coating (tile) the contour of the pool to fix any cracks or holes in the mosaic and other flaws that are detected. You can clean the structure with a brush and a detergent acid. Then they can refill the pool, put a filter cleaner for debris or use a surface scanning system.
On the other hand, the chemical treatment of water is also important. Disinfection of water is required even though the water looks clean. To kill the bacteria do not want and remove all micro-organism that may contain, it is treated with chlorine. After adding this chemical, some is consumed by distributing water contaminants, while the rest remains as residual chlorine tablets in the bottom of the pool.
In the case of algae appear, we need to fix before they multiply rapidly in water, usually occur when the temperature of this begins to be high. The algae spores reach the pool water by wind or rain and can be dyed green. If this happens, it must control the pH, to then make a shock chlorination. It is important that pool water is maintained at 7.5 pH environment.